Installation Information
(For Standard Specification)
Net Weight
6800kg
7040kg
7200kg
Area Required
L15221 x W4800 x H1573
L15221 x W5020 x H1773
L15421 x W5220 x H1973
Power
380V/42KW/64A
380V/44KW/79A
380V/46KW/83A
Water
15-20°C
15-20°C
15-20°C
Air
6kg/cm³
6kg/cm³
6kg/cm³
Materials
Sealable laminated film, thickness 40-150µ. (80-150µ for Stand-up pouch and zipper bag)
Main Drive & Feeding Motor
Main drive servo motor with driver provide accurate sealing time control, suitable for constant sealing time control system.
Feeding Motor
Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.
Unwind Section
Horizontal type unwind stand / Swing-out/lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient.
Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control.
Equipped with line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position.
Upgraded dancer-roller provides stable tension for films before entering the bag making section.
Bottom-gusset-forming devices are equipped with adjustable gusset depth control plate and pre-forming device, which can provide accurate forming position without film-slip problem.
Bag Making
AFM-73SZ can make six kinds of bags: half-fold side-seal bag, 3-side-seal bag, stand-up pouch, half-fold side-seal bag with zipper, 3-side-seal bag with zipper, and single web stand-up pouch with zipper.
3-side sealed bags can be made by 3-lanes operation within maximum parent-web width.
Stand-Up pouches and zippers bags can be made by 1-lanes operation within maximum parent-web width (pouch made by single film, need not separate pouch bottom strip).
Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.
Equipped with ultrasonic Welder, the zipper (in the side-sealed position) can be welded and flattened perfectly, solve the leakage problem.
Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request).
Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops.
Equipped adjustable K-shape sealing mould, suitable large size stand-up pouch.
The design of safety cutter provides extra safety for the operator.
Maintenance
Equipped with covered bearing, which is unnecessary for lubrication, prolong the parts life and makes maintenance easier, faster and cleaner.
Computer Control System,Touch-Screen, and 3-Servo System
Maintain a constant sealing time, which may largely reduce test-run scraps. When the machine speed is changed, it is not necessary to adjust temperature of the heater.
Touch-screen makes operation easier and faster.
Built-in Sealing Temperature Controller.
Auto alarm/stop available for abnormal condition.
Alarm messages are displayed on the screen.
Modem interface available for remote maintenance.
Data base for saving 100 sets of working parameters.
Operation and maintenance procedures and parameters are memorized in the computer control system for easy setup or review.
Optional Accessories
Unwind 3"/6" airshaft
Pneumatic loading device(in unwind section)
6" air chuck
Vertical/horizontal 2nd unwind stand
Various puncher
Conveyer
Round corner cutter
The working speed depends on the material condition and bag size.
Due to machine development, above information maybe changed without notice.
Quick Navigator Menu: (Right-Click again to close this menu.)
