| Applicable Material | Sealable laminated film, thickness 40-150.(80-150 for Stand-up pouch and Zipper bag) |
| Main Drive | Main drive servo motor with driver provide accurate sealing time control, suitable for constant sealing time control system |
| Feeding Motor | Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control |
| Unwind Section | Horizontal type unwind stand / Swing-out/Lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient. |
| Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control. |
| Equipped with Line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position. |
| Upgraded dancer-roller provides stable tension for films before entering the bag making section. |
| Two bottom-gusset-unwinding devices are equipped with motors and position detectors, which can provide stable feeding speed and tension. |
| Bag Making | ABM-53SPZ can make four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper. |
| 3-side sealed bags can be made by 3-lanes operation within maximum parent-web width. |
| Stand-Up pouches and zippers bags can be made by 2-lanes operation within maximum parent-web width. |
| Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control. |
| Equipped with Ultrasonic Welder, the zipper (in the side-sealed position) can be welded and flattened perfectly, solve the leakage problem. |
| Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request). |
| Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops. |
| The design of safety cutter provides extra safety for the operator. |
| Maintenance | Central Lubrication System is connected to each important internal parts, makes maintenance easier and faster. |
Computer Control
System,
Touch-Screen, and
3-Servo System | Maintain a constant sealing time, which may largely reduce test-run scraps. When the machine speed is changed, it is not necessary to adjust temperature of the heater. |
| Touch-screen makes operation easier and faster. |
| Built-in Sealing Temperature Controller. |
| Auto alarm/Stop available for abnormal condition. |
| Alarm messages are displayed on the screen. |
| Modem interface available for remote maintenance. |
| Data base for saving 100 sets of working parameters. |
| Operation and maintenance procedures and parameters are memorized in the computer control system for easy setup or review. |
| Optional Accessories | Unwind 3"/6" airshaft |
| Pneumatic loading device (in unwind section) |
| 6" air chuck |
| Vertical/horizontal 2nd unwind stand |
| Various puncher |
| Conveyer |
| Round corner cutter |
The working speed depends on the material condition and slit-width.