HOME > Product > Bag Making Machine > ABM-53SPZ, Stand-Up Pouch, Zipper Bag Automatic 3-Side-Seal Bag Making Machine

Features

Stand-Up Pouch, Zipper Bag Automatic 3-Side-Seal Bag Making Machine (3- Servo System)

ABM-53SPZ

Model No.		ABM-53SPZ	ABM-63SPZ	ABM-73SPZ
Max Parent Web Width		400~1000mm	400~1200mm	400~1400mm
Max Parent Web Diameter		650/800mm	650/800mm	650/800mm
Max Bag Width		60~120mm	60~120mm	60~120mm
Max Bag Length		420mm	420mm	420mm
Machine Speed		160 cuts/min (For 3-Side-Seal Bag) 100 cuts/min (For Stand-Up Pouch/Zipper Bag)	160 cuts/min (For 3-Side-Seal Bag) 100 cuts/min (For Stand-Up Pouch/Zipper Bag)	160 cuts/min (For 3-Side-Seal Bag) 100 cuts/min (For Stand-Up Pouch/Zipper Bag)
Installation Information (Standard Specification)	Net Weight	6460kg	6680kg	7000kg
	Area Required	L14532 x W5220 x H1795	L14532 x W5419 x H1995	L14685 x W5619 x H2195
	Power	380V/43KW/60A	380V/46KW/84A	380V/48KW/86A
	Water	15-20°C	15-20°C	15-20°C
	Air	6kg/cm³	6kg/cm³	6kg/cm³

Application Material

Sealable laminated film, thickness 40-150µ. (80-150µ for Stand-up pouch and zipper bag)

Main Drive

Main drive servo motor with driver provide accurate sealing time control, suitable for constant sealing time control system.

Feeding Motor

Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control

Unwind Section

Horizontal type unwind stand / swing-out / lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient.
Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control.
Equipped with line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position.
Upgraded dancer-roller provides stable tension for films before entering the bag making section.
Two bottom-gusset-unwinding devices are equipped with motors and position detectors, which can provide stable feeding speed and tension.

Bag Making

ABM-53SPZ can make four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper.
3-side sealed bags can be made by 3-lanes operation within maximum parent-web width.
Stand-Up pouches and zippers bags can be made by 2-lanes operation within maximum parent-web width.
Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.
Equipped with ultrasonic Welder, the zipper (in the side-sealed position) can be welded and flattened perfectly, solve the leakage problem.
Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request).
Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops.
The design of safety cutter provides extra safety for the operator.

Maintenance

Equipped with covered bearing, which is unnecessary for lubrication, prolong the parts life and makes maintenance easier, faster and cleaner.

Computer Control System,Touch-Screen, and 3-Servo System

Maintain a constant sealing time, which may largely reduce test-run scraps. When the machine speed is changed, it is not necessary to adjust temperature of the heater.
Touch-screen makes operation easier and faster.
Built-in Sealing Temperature Controller.
Auto alarm/Stop available for abnormal condition.
Alarm messages are displayed on the screen.
Modem interface available for remote maintenance.
Data base for saving 100 sets of working parameters.
Operation and maintenance procedures and parameters are memorized in the computer control system for easy setup or review.

Optional Accessories