Features
Stand-Up Pouch, Zipper Bag, Automatic 3-Side-Seal Bag Making Machine (2-Servo System)
ABM-52SPZ Serie
| Model No. |
ABM-52SPZ |
ABM-62SPZ |
ABM-72SPZ |
| Max Parent Web Width |
400~1000mm |
400~1200mm |
400~1400mm |
| Max Parent Web Diameter |
650/800mm |
650/800mm |
650/800mm |
| Max Bag Width |
60~120mm |
- |
60~120mm |
| Max Bag Length |
420mm |
420mm |
420mm |
| Machine Speed |
120 cuts/min (For 3-Side-Seal Bag)
100 cuts/min (For Stand-Up Pouch/Zipper Bag) |
120 cuts/min (For 3-Side-Seal Bag)
100 cuts/min (For Stand-Up Pouch/Zipper Bag) |
120 cuts/min For 3-Side-Seal Bag)
100 cuts/min (For Stand-Up Pouch/Zipper Bag) |
Installation Information
(Standard Specification) |
Net Weight |
6460kg |
6680kg |
7000kg |
| Area Required |
L14532 x W5220 x H1792 |
L14532 x W5419 x H1975 |
L14582 x W5619 x H2195 |
| Power |
380V/42KW/64A |
380V/44KW/79A |
380V/46KW/83A |
| Water |
15-20°C |
15-20°C |
15-20°C |
| Air |
6kg/cm³ |
6kg/cm³ |
6kg/cm³ |
| Application Material |
- Sealable laminated film, thickness 40-150. (80-150 for Stand-up pouch and zipper bag)
|
| Main Drive |
- Main drive (A.C. motor) with inverter.
|
| Feeding Motor |
- Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.
|
| Unwind Section |
- Horizontal type unwind stand / Swing-out/lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient.
- Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control.
- Equipped with line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position.
- Upgraded dancer-roller provides stable tension for films before entering the bag making section.
- Two bottom-gusset-unwinding devices are equipped with motors and position detectors, which can provide stable feeding speed and tension.
|
| Bag Making |
- ABM-52SPZ can make four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper.
- 3-side sealed bags can be made by 3-lanes operation within maximum parent-web width.
- Stand-Up pouches and zippers bags can be made by 2-lanes operation within maximum parent-web width.
- Equipped with ultrasonic Welder, the zipper (in the side-sealed position) can be welded and flattened perfectly, solve the leakage problem.
- Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request).
- Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops.
- The design of safety cutter provides extra safety for the operator.
|
| Maintenance |
- Equipped with covered bearing, which is unnecessary for lubrication, prolong the parts life and makes maintenance easier, faster and cleaner.
|
| Optional Accessories |
- Pneumatic loading device (in Unwind section)
- Dia.3" /6" unwinding air-shaft
- Dia.6" air chuck
- Vertical or Horizontal 2nd unwind stand
- Punching device with round hole mould diameter 8mm
- Conveyer
- Flat sealing mould
- Separate round corner cutting machine (one cut, one corner)
|
- The working speed depends on the material condition and bag size.
- Due to machine development, above information maybe changed without notice.
|